Atlas BT10 V8

 
  • BT10-Mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly.
  • Height Range approximately 4.75 – 9.0".
  • 15 degrees +/- of preloaded Pan
  • 15 degrees +/- of preloaded Cant
  • Leg positions are; stowed back, 90 degrees straight down, 45 degrees forward and stowed forward.
  • Weight 11.0 ounces.
  • Available in black only.
  • Made in America
 
 
53.100 kr.
 
Uppselt
 

Atlas BT10-LW17 V8

 
  • Mounts directly to any 1913 style Picatinny rail via included ADM 170-S Lever.
  • Height Range approximately 4.75 – 9.0".
  • 15 degrees +/- of preloaded Pan.
  • 15 degrees +/- of preloaded Cant.
  • Leg positions are; stowed back, 90 degrees straight down, 45 degrees forward and stowed forward.
  • Weight 12.7 ounces.
  • Available in black only.
  • Made in America
 
 
60.500 kr.
 
Uppselt
 

BT65-LW17 Gen. 2 CAL Atlas Bipod

 

The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature.

The BT65-LW17 mounts directly to any 1913 style Picatinny rail via the included ADM-170-S Lever. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. We chose to support a legend in the shooting sports by using the original KMW “Pod-Loc™.”

With the CAL bipod mounted to your rifle, you will be able to lock and un-lock the canting motion by rotating the Pod-Loc™ lever. Turn clockwise to lock and counter clockwise to un-lock. The Pod-Loc™ lever position can be adjusted for positioning by pulling the lever directly away from the body of the CAL and rotating to desired position. This positioning can be repeated until optimal position is achieved. Available in black only.

  • Height Range: 4.75 – 9.0" approximately
  • Cant: 15 degrees +/-
  • 5 leg positions: 0, 45, 90, 135 and 180 degrees
  • Non-Rotating Legs: outer leg does not rotate around inner leg
  • Larger, stronger inner legs
  • Weight: 14.57 ounces
  • Footprint: 9.75 – 13"
 
 
69.100 kr.
 
Uppselt
 

Atlas BT46-LW17 PSR

 
  • Mounts directly to any 1913 style Picatinny rail via included ADM 170-S Lever.
  • Height Range approximately 4.75 – 9.0".
  • 15 degrees +/- of preloaded Pan.
  • 15 degrees +/- of preloaded Cant.
  • Leg positions are; stowed back, 90 degrees straight down, 45 degrees forward and stowed forward.
  • Fore and Aft pivot limiting Bosses*
  • Non-Rotating Legs*
  • Strengthened Leg Boss*
  • Inner Leg constructed from T7075*
  • Weight 13.61 ounces.
  • Available in black only.

https://www.youtube.com/watch?v=kWrlJOzlKrw

 
 
72.200 kr.
 
Uppselt
 

BT72-LW17 Super CAL Atlas Bipod

 

The BT72-LW17 Super CAL (Cant And Loc) Atlas Bipod does not PAN. This model mounts directly to any 1913 style Picatinny rail via the included ADM-170-S Lever. Includes patented 45° leg positions, non-rotating legs, optional quick change feet and “Hold What You Move Technology™.”

It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and has heat treated stainless steel components. Available in black only. We choose to support a legend in the shooting sports by using the original KMW “Pod-Loc™.” Read how to adjust the Pod-Loc™ lever below.

  • Height Range: 5.875-11.125(7.66” at 90°) 
  • Cant: 45 degrees
  • Position Button: 0.5" diameter
  • 5 leg positions: 0, 45, 90, 135 & 180 degrees
  • Non-Rotating Legs: outer leg does not rotate around inner leg
  • Weight: 23.16 ounces
  • Footprint: 14.75-19.37"
 
 
81.200 kr.
 
Uppselt
 

5-H Atlas Bipod BT35-LW17

 
  • Mounts directly to any 1913 style Picatinny rail via included CUSTOM ADM Lever.
  • Height Range approximately 5.5 - 10.5"
  • 15 degrees +/- of preloaded Pan.
  • 15 degrees +/- of preloaded Cant.
  • 5-H Pan and Cant can be locked out at top dead center
  • PAN and CANT Tension Wheel has Detent adjustability and Cam-Lock
  • PATENTED multiple deployable leg positions of 0, 45, 90, 135 and 180
  • Non-Rotating Legs*
  • Weight 26 ounces.
  • Available in black only
 
 
84.000 kr.
 
Uppselt
 

BT04-QK - Standard height Atlas Stud Mount with QK01 Quick Knob

 

Standard height PRM with QK01 Quick Knob. Elevation Range 3.75 – 4.85”. Weight 7.3 ounces.

 
 
17.400 kr.
 
Uppselt
 

Atlas BT12-QK – Standard height PRM (Precision Rail Monopod)

 

Standard height PRM with QK01 Quick Knob. Elevation Range 3.75 – 4.65”. Weight 7.4 ounces.

 
 
19.600 kr.
 
Uppselt
 

Atlas BT15

 

The BT15 - 3.35" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 1.76 – 2.78" and a relieved back to accommodate curved surfaces.

 
 
7.000 kr.
 
 

Atlas BT17

 

The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces.

 
 
7.000 kr.
 
 

Atlas BT28

 

Picatinny rail (millistykki) fyrir atlas tvífót í european rail. (Anscutz - AI rail.)

 
 
6.800 kr.
 
 

Atlas BT34

 

The BT34 - 2.05" 1913 Picatinny Rail has a center to center spacing of 1.6" with a 1.00" radius back. Two machine screws can be used, but are not included (see BT1517) to attach this rail to the forearm of standard rifle stocks. It can also be attached to a horizontal surface on the Butt section to attach our Precision Rail Monopods (BT12, BT13, BT31).

 
 
5.900 kr.
 
 

Atlas BT49

 

The BT49 - 2.05" 1913 Adjustable Picatinny Rail has a center-to-center spacing of 1.2 - 1.6" with a 1.00" radius back. Two machine screws can be used, but are not included (see BT1517) to attach this rail to the forearm of standard rifle stocks.

The BT49 can also be attached to a horizontal surface on the Butt section to attach our Precision Rail Monopods (BT12, BT13, BT31).

 
 
6.000 kr.
 
 

Atlas BT73 M-LOK rail

 

The BT73 M-LOK® Rail is designed for use with all M-LOK compatible hand guards, forends and buttstocks. It has 3 usable slots for attaching any of our 1913 Picatinny rail mounted Atlas BipodsAccu-Shot Monopods or Folding Foregrip. It requires standard M-LOK® sized slots for mounting.

Machined from 6061-T6 aluminum and Type III hard coat anodized. It comes with two 10-24 x 3/8 fasteners and two M-LOK® nuts. Available in black

 
 
6.400 kr.
 
 

Atlas BT78

 

BT78: SIG SAUER® CROSS™ Buttstock Rail Kit is a 2.05" 1913 Picatinny Rail that installs directly onto the folding buttstock of the SIG SAUER® CROSS™ rifle to allow for mounting of any of our PRM style of Accu-Shot Monopods.

 
 
5.500 kr.
 
 

GrovTec millistykki

 

Til að breyta picatilly rail í festingu fyrir Harris tvífót.

 
 
7.800 kr.